0x51 Jungleflasher

Xbox360 DVD Tray Half OpenHelp using jungleflasher 1.89 to put stock firmare back … – Help using jungleflasher 1.89 to put stock firmare back … Sending Vendor Intro to port 0x0000 Status 0x51 PhatKey extraction failed! Sending Vendor Outro to port 0x0000 Drive is Lite-On.. Key found in KeyDB at record (1 – dummy from my reail lite on) …

Trying to flash benq ix1.51 | AfterDawn Discussion Forums – I’m using the user guide for jungle flasher and I can’t get it to read the drive. I have the ck3 connectivity kit and … It seems like what is happening is that it keeps going to status 0x51 when it is supposed to stay in 0x73. I don’t know how to fix this though or even if this is …

That is a Hitachi, not a BenQ. Unless the BenQ drive has been spoofed as a Hitachi. But I guess since you are getting 0x51, maybe it’s that the chipset is incompatible.

I tryed to do it without the half open trick and start Jungleflasher… still get the message Sending vendor Intro to port 0xAC00 Status 0X51 when i press Intro/Device ID What can i do? it is on both the Xbox consoles…

Jungleflasher Samsung – Vendor Intro Failed – posted in Technical DVD-ROM and Modified DVD Firmware Forum: Ok guys, i have flashed loads of drives before. … Status 0x51 Re-sending Vendor Intro: ….. Device Intro failed! I cannot get the drive into …

DosFlash64 Finds the drive on 0x9800 and sends MTK intro, but when I power cycle the drive I only get status 0x51 or 0x52. Jungle flasher 1.88b still says no drive detected after multiple boots and drive power cycles. Jungle flasher also doesn’t see my sata HDD

JungleFlasher JungleFlasher => Support and General Assistance => Topic started by: Avinitlarge on February 23, 2011, 06:59:29 PM

c4eva Spoke! (2013-01-31 #jungleflasher) c4evaspeaks.com 31 Jan 2013 | 10:17 am [2013-01-31 02:17AM UTC] #JungleFlasher awesome, well done everyone!

Code: JungleFlasher 0.1.76(166S) ===== Lite-On LT + support Benq LT + support JungleFlasher 0.1.75(152S) ===== GAME TUTS. Keep me signed in; Switch to Modio. Home; Forums; Gamesaves; Modio; FAQ; Calendar … Status 0x51 Getting Status from port 0xB000

0x51? I’ve been trying to flash this ms25 drive all day and it keeps me that same error in JungleFlasher when I try to put it in vendor mode. I’ve … I’ve been trying to flash this ms25 drive all day and it keeps me that same error in JungleFlasher when I try to put it in vendor mode.

Rating for nwaha.org: 5 out of 5 stars from 41 ratings.